EUROLITE LED D-2000 Beam Effect

The LED D-2000 Beam Effect by Eurolite comes equipped with 5 high-performance 10-watt LEDs in the colors red, green, blue, amber and white creating dynamic strobe and derby effects. The LED D-2000 works with 3 preset programs. In the automatic mode, the preset light programs are played fully automatically without any further adjustments on your part. Alternatively, you can choose the sound-controlled mode via the built-in microphone with adjustable sensitivity. You can also operate multiple devices in sync using the master/slave mode. Apart from the preset programs, the LED D-2000 can also be controlled via 5 or 9 DMX channels. For the addressing and settings (such as the color selection for 15 mixed colors, color changes, fade effects or dimmer effects) you can either use the 4-digit LED display and operating buttons on the rear of the device or the supplied IR remote control. What is more, the LED D-2000 is compatible with QuickDMX, the wireless DMX system by Eurolite. A phantom-powered USB port for a wireless transmission of the DMX signal through a QuickDMX receiver can be found on the rear of the device.

Extremely bright Derby with 5 x 10 W LED in R,G,B,A,W

• Absolute eyecatcher
• 5 x 10 W LED in the color red, green, blue, amber and white for dynamic strobe and derby effects
• Auto, music, master/slave and DMX mode
• Direct color selection for 15 preset colors
• DMX control via every standard DMX controller
• 5 or 9 DMX channels selectable
• 3 built-in auto and music show programs
• Sound-control via built-in microphone with adjustable microphone sensitivity
• The colorful beams change their direction of movement at every bass-beat in sound controlled mode
• Addressing and setting via control panel with 4-digit LED display
• Supports QuickDMX - the wireless DMX system from Eurolite
• Built-in phantom-powered USB port for QuickDMX receivers (accessories)
• Convenient wireless control via included IR remote control EUROLITE IR-7
• Function: static color, auto mode, sound control, interne programs, color change, color fade, dimmer and strobe effect
• Locking possibility at the mounting bracket
• IEC terminals for power linking up to 8 units
• Switch-mode power supply for operation between 100 and 240 volts
• LED: 5 x high-power 10 W RGBWA
• Control: QuickDMX via USB (optional); Stand-alone; Sound to light via Microphone; IR remote control included; DMX

Power supply:	100-240 V AC, 50/60 Hz
Power consumption:	60 W
LED:	5 x high-power 10 W RGBWA
Flash rate:	0 - 20 Hz
DMX channels:	5; 9
DMX input:	3-pin XLR (M) mounting version
DMX output:	3-pin XLR (F) mounting version
Control:	QuickDMX via USB (optional)
	Stand-alone
	Sound to light via Microphone
	IR remote control included
	DMX
Beam angle (1/2 peak):	70°
Length:	29,0 cm
Width:	28,5 cm
Height:	20,0 cm
Weight:	2,70 kg
Legal specifications
Ecodesign regulation:	Yes
Special product:	Not designed for household room illumination
Purpose:	Show effect lighting