Apart AUDIOCONTROL12.8 DSP-Audio und Steuer-Matrix

AUDIOCONTROL12.8 - Digital Audio Matrix and Paging System

AUDIOCONTROL12.8 is an audio matrix, but unique on the market thanks to its combination of audio processing, control processing and endless paging possibilities. The unit has 12 audio inputs and 8 audio outputs, plus additional SPDIF-input and output.

The integrated real time task scheduler can perform a variety of tasks that means the AUDIOCONTROL12.8 is suitable for many projects. Up to 120 addressable/programmable paging microphones/extenders can be connected, each with their own functionality and individual presets and up to 8 priority levels.

DIMIC1/DIMIC12 and DIMIC12S are digital paging stations that are easy to configure via the host’s graphical installer interface. Where DIMIC1 is an all call paging station, DIMIC12 is a zone and multipurpose paging desk. All buttons can be programmed to do exactly what you want them to do; page a zone, select a source, control the volume, recall a preset, trigger a macro or even do control functions of other devices like a CD player for example. Per DIMIC12 you can connect up to 7 DIMIC12S expansion units allowing a total of 96 programmable buttons available.

The DIWAC wall mount controller is ideal to control the AUDIOCONTROL12.8 in every single room. The wall mount controller is programmable via the host’s unit’s graphical installer interface to allocate the functionalities you need. Via the GII you can program the wall control to trigger macro’s or even control 3rd party devices.

The GII (Graphical Installer Interface) has been developed to be extremely installer-friendly, this makes it possible for every integrator to configure the required unique solution. The variety of installations where AUDIOCONTROL12.8 can be used is endless and only limited by the installer’s creativity.


Features

- Audio & Control processing
- Endless paging possibilities
- 12 audio inputs – 8 audio outputs
- RS232 serial control
- Configurable control functions
- Extremely short propagation time
- Built-in real time clock scheduler
- Installer-friendly GII (Graphical Installer Interface)
- Fixed architecture DSP platform
- Macro programming possible
- Fully programmable DIMIC1 and DIMIC12(S) digital paging stations
- Fully programmable DIWAC (digital wall mount controller)
- Designed by Apart Audio and manufactured in Europe
- Dimensions: 483 (w) x 44 (h) x 310 (d) mm


Technical Specifications

Analog balanced inputs 1 – 6:
- Input impedance: 6k Ohms (2k Ohms with pad)
- Phantom power: 24 VDC
- Digital gain: 0 – 20 dB
- Max input level: -26dBV - +18 dBV (4 steps)
- SNR: 100dB

Analog unbalanced inputs 7 – 12:
- Input impedance: 10k Ohms
- Digital gain: 0 - 20 dB
- Max input level: +18 dBV
- SNR: 100dB

Analog unbalanced outputs 1 – 8:
- Output impedance: < 100 Ohm
- Digital gain: -12dB to +6dB
- Max output level: +20dBV
- SNR: 93dB
- THD+N: 0,005%
- Channel separation: 92 dB

Digital input and output:
- Input: SPDIF 2 channel. 8 – 24 bit, 32 – 96 kHz sampling rate with sampling rate converter
- Output: SPDIF 2 channel. 24 bit, 48 kHz fixed sampling rate

Control section:
- RS232A port settings: 19200 Baud, 8 databits, no parity and 1 stop bit
- RS232 B/C settings: selectable via GII: baudrate: 600, 1200, 2400, 4800, 9600, 19200, 38400, 8 databits, no parity and 1 stop bit
- Wall panel connections: 8x euroblock2

General:
- Front panel indicators: 24 multi colour audio signal leds, 22 control indicator leds, Power indicator led
- Power supply: 88 – 264 VAC / 50-60 Hz, Max 75 VA
- Sampling rate: 48 kHz
- Latency: 1.2 ms latency from analog input to analog output
- Frequency response: 20Hz to 20 kHz +- 1dB
- Dimensions (W x D x H): 484 x 316 x 44 mm
- Weight 3.8 kg